DE-1103 Easter Egg: Tuning from 000 to 099 kHz

thank you engineer #21951! phil :)

STORING 000 kHz IN MEMORY "99":

1. retract fully the antenna
2. switch DX/LO to "LO" [aka attenuator on]

Note: step #1 and #2 reduce stopping during scanning

3. turn on the radio
4. enter: 21951 [BAND+]

Note: the display shows no square around any meter band

5. press and hold [BAND-] until downward scanning begins
6. wait for the display to read lower than 100 kHz

Note: this scan process will take about 14.5 minutes

7. press [Band+] to stop while tuned between 0 and 99 kHz

Note: if you go past simply press and hold [Band+]

8. turn the tuning dial until 000 kHz is displayed
9. enter: "99" STORE STORE

Note: now memory 99 has 000 kHz for future access

10. remember to switch DX/LO back to "DX"

FUTURE USAGE

1. enter: "99" [M/F] then press [M/F] again
2. turn the tuning dial upward from 000 kHz

OTHER USAGES

Storing other values into memory while in this mode allows
continuous scanning up or down from those values as well.





Try this hint:

Type 29850, hit BAND+,
then store it in MEMORY.

Then hold BAND+ to start scanning up.

Very sensitive moment: be ready to stop scanning by touching wheel or
push ANY button when frequency goes beyond 30 000 - first digit
becomes like mirrored 6: Something like d0005. Store this new
frequency. Congratulations - you expanded or "opened" your DEGEN
beyond 29 999 kHerz. It is not so easy to do it from the first try,
start from saved frequency (29850 or near) again.

I'm sorry if it is old info for the forum, just wanted to share
technical information. I'm not sure if it is legal to listen beyond
30 000 kHz in particular country. For me it was the same fun like get
00001 Herz on the screeen of my DE1103
The source or information - russian site www.radioscanner.ru